Home Boston Whaler T-Top - Fishmaster Customer Gallery

Boston Whaler T-Tops

When you chose your Boston Whaler, you chose a boat that’s built for luxury and the experience. Just as you would expect cutting-edge features from your boat, you can expect the same from Fishmaster’s original folding t-tops.

Our Boston Whaler t-tops are built to give you an affordable t-top that looks like it costs $3,000, without skimping on the details. Our original patented t-top folds twice and has a quick, DIY install.

The Boston Whaler t-top is state-of-the-art, giving you handholds and storage at the helm without taking up space on deck. Built with 6063-T6 aluminum with a protective anodized finish to reduce the risk of corrosion, your Boston Whaler t-top is going to give you the stability and durability you need to stay looking and functioning great for years to come.

Browse through our customer gallery to see examples of the 10,000 t-tops we already have out on the water. Our customers love their t-tops, and we’re so confident that you will, too, that each one is backed by our five-year warranty and “Love it or Return it” money-back guarantee.

  1. Updated Photo 190 Montauk | "Added supports, been on about a year now with ZERO issues."

    Mike Williams

    Rating

  2. 1986 Boston Whaler 17’ Montauk | "All went well."

    Tim Albro Eufaula OK

    Rating

  3. 1986 Boston Whaler 17’ Montauk | "All went well."

    Tim Albro Eufaula OK

    Rating

  4. Perfect T-top for inshore fishing in Beaufort, SC. | "The pro series T-top is constructed with large diameter aluminum tubing and is extremely sturdy. It has just the right amount of shade without impeding casting lanes. The Dauntless has a very wide beam (8') so it gives plenty of room move around the center console.. I would strongly recommend the pro series T-top."

    Stephen Parsons Beaufort SC

    Rating

  5. Built like a tank | "Best aftermarket T-Top on the market. Whaler doesn't offer a factory T-top in the 170 size Montauk, so I had to go custom built or aftermarket. I bought the Pro version specifically because I wanted to have the larger tubing to handle heavy add-ons, and it has delivered 100%. Absolutely zero regrets with the purchase. I know local guys that paid a welder $5K to build a custom folding top, and it wasn't as nice as the FM Pro (for half the price). I'm got 18' Carbon fiber side riggers (double lines each side) on Taco GS-390 bases, and a 15' carbon fiber center rigger on a Taco GS-170 base. If you install the base plates near the center support structure like I did, the t-top can more than handle the load and torque from the riggers. Stop shopping and buy it....worth every penny."

    Vincent Duryee Kailua HI

    Rating

  6. Solid aftermarket T Top at a great price. | "Just got my brand new boat. It took me about a week to install it. But if you are mechanically inclined you can do a lot faster. My Boston Whaler is form filled and has special Phenolic Backing and it took me a bit longer. But overall I think this T top is a great value, excellent quality, and the company has great customer services. "

    Lung Tseng Plantation FL

    Rating

  7. Looks Awesome, Its a great addition to any center console boat | "What an amazing top. T Tops don't really work with a 17 foot Boston Whaler but with a little ingenuity, and welding you can make it work. Rock solid in any condition."

    Kris Sarellano Torrance Ca

    Rating

  8. 190 Montauk | "Good fit, very stable"

    Mike22 Bolivia NC

    Rating

  9. great products | "leaning post and T-Top are a perfect fit for this 1971 outrage!"

    mitchell d smith HOLLAND MI

    Rating

  10. great t-top | "solid.....made for Hawaiian waters Aloha"

    james hill Kaneohe HI

    Rating

  11. Fishmaster T-Top is the Best | "I’ve tried for several years to get a boat slip at a Marina in Daytona. Finally got a call that one was available. Took my boat to the marina and was told a T-Top wouldn’t fit in the slip. Folded it down and it fits perfectly! Thank you Fishmaster for a workable T-Top that holds up and is foldable!"

    Bob Lithia Springs Ga

    Rating

  12. Love my Fishmaster Pro T-Top and accessories | "The Fishmaster Pro has been a great addition to my Boston Whaler. Very sturdy and well constructed. Makes a huge difference in the appearance and utility of my boat. I added storage, lighting options and various other mounts including for a radar dome. All installed as planned and have used for an entire boating season without any issues. Great purchases. Highly recommend."

    Brian Truskowski RIDGEFIELD CT

    Rating

  13. Love to Tower | "Fantastic Product all my friends and family telling me how much better my boat looks. Provides just the shade I need and allows for fishing Love It !"

    Bob Crawley Parsons TN

    Rating

  14. Great T-top and good value $$$. | "This T top looks great and was easy to install."

    Jim Chapman Pasadena MD

    Rating

  15. Everybody loves it | "Love it so easy to install"

    Michael perkins Arundel Me

    Rating

  16. Wanted a white T-Top that looked like it was from the factory and with the option of folding (which I never do). | "Wanted a white T-Top that looked like it was from the factory and with the option of folding (which I never do). This is exactly what I got. I get compliments to this day about how amazing it looks and wuestions about who makes it! I have no complaints at all. Looking forward to new items from you guys. Lots of the stuff I have from you are helpful and looks good on my boat! I have on my boat right now from FishMaster’s LED Light Bar LED Spreader Bar Universal mounting bracket Storage bag for Pro Trash tote Beverage holder Rod holders Still need to install my dry box. "

    Shaggy Dominici Kaneohe HI

    Rating

  17. Pro series on the 15 Dauntless | "So far I love the look, the construction was excellent and solid. Finish with the powder coat in bone white is beautiful in the sunlight...Pictures speak for themselves."

    Steve Gazdik Warren OH

    Rating

  18. "Kodiak Island, Alaska - 20ft Boston Whaler V-20 Outrage"

    Wade Johnson

    Rating

  19. Butch

    Rating

  20. "I installed your T-top on my 1993 Boston Whaler Outrage and it fits awesome. I've had it out on one trip so far and it was awesome. Had it out in 2-3 ft seas, pouring rain and florida summer summer sun and it did great. It did loosen up a little bit to be expected when running 15 miles offshore in 2-3s. I even managed to shoot two 40 lb cobia and we filled the cooler with kings. Hell of a first day with the T-top"

    Ryan Williams

    Rating

  21. "I love the ease of installation. I did it by myself and I'm 70. I used a few tricks I've learned in the years. Thanks Gregg for your help, everyone at Fishmaster is a pleasure to talk with. For Boston Whaler installers feel free to have them contact me if they have questions. On the 2007 model the floor is flat and level making for an easy installation. I had to get the vertical stiffeners because the Whalers console is short.Very pleased with ease of installation, the craftsmanship for the money and the sturdiness. Job well done."

    Bob Brock

    Rating

  22. Jeff Vangsness

    Rating

  23. "I installed it on my 1970 Boston Whaler 16. It sure gives a professional look"

    Denis Pelletier

    Rating

  24. "I love my new T-Top. Fits my 19ft Boston Whaler Montauk perfectly. Thanks."

    Jon Knapp

    Rating

  25. "When I first visited your website I was impressed by your honest admonitions about the potential difficulty in installing your T-Top in a 1996 Boston Whaler Montauk because of the floor angled surface just ahead of the console where the two forward supports would screw to the floor. Because you alerted me to that situation I was able to work out a potential solution before I placed the order and the solution, which is simply a shim tapered in two directions, worked out well.The first photo shows the assembled T-Top held to the correct angle by ropes both longitudinally and laterally using taut line hitches to permit easy adjustability to the boat which is leveled side-to-side. This allowed me to measure how thick the forward shims needed to be and how much taper was needed both fore and aft and side to side.The next photo is of one of the two forward shims made from pressure treated decking wood after it was cut with the side-to-side taper. I set my table saw blade to 15 degrees and cut this so that its thickness came out about 3/4 inches at the high side with a width of 2 1/2 inches and about a foot long. I then cut off a 3 3/4 inch length and proceeded to form a taper in the lengthwise direction using a hand chisel and finally finishing up with a belt sander. That was a trial and error process but went fast for both forward shims.When I got reasonable close to the right compound taper, I slipped each shim under the front legs and drilled through the shims and cockpit floor using the support flange holes as a guide. Then I applied white marine tex, which is an epoxy putty, to the underside of the two forward tapered shims and then screwed down all four T-Top legs. I used marine tex because being rather thick it was able to compensate for the lack of precision of my tapering. The next morning I unscrewed the T-Top legs and found the shims to be securely bonded to the floor. I then applied 3M 5200 to the screw holes and the top and sides of the shims and reattached the T-Top permanently to the boat. All the surfaces of the wood shim are encapsulated with the 5200 caulking.I am very impressed with the stiffness of the T-Top after installing the side supports to my console. The whole assembly, as shown in the last photo, gives us a very secure feeling when traveling in rough water to the point that I plan to remove the standard Whaler railings around the console since holding on to your T-Top feels safer and more natural. Fishmaster did a great job in engineering and manufacturing this unit and your instructions were easy to follow. Patty Cake is a very happy little boat. Good work!Sincerely,Ray Leoni,Cape Cod, Centerville MA"

    Ray Leoni Cape Cod MA

    Rating

  26. "I had to do some changes on the front legs. But other than that I had no problems on the first fishing trip I got comments at the gas station. I installed it by my self an I'm 71 years old."

    Charles Malone

    Rating

  27. "I am very pleased with the way the t top looks and have already gotten compliments, even from Matthews Marine, who did the work in Beaufort, SC."

    Wayne Quinlan Beaufort SC

    Rating

  28. "The actual install was easy. The custom wiring of the electronic box and led lights took a bit more time being that it was my first and "on the fly". Any way I'm very happy with the quality of the T-Top components and how well it fits on the boat. I originally bought the e-box to mount a stereo but after wondering where to put the speakers and such I decided to go wireless with a Bluetooth Bose Mini Speaker. This way I can take it all home and not worry about corrosion. Inside the box I installed a panel with a negative bus bar, 4 switches and two 12 volt power outlets so I can switch the Led lights and charge my phone and the Bose if needed. I made the windshield from 1/4" Lexan and mounted it with plastic wire ties. I put a slight bend at the bottom with a heat gun to match the lower angle of the frame legs. I'll come off after the spring passes with a simple snip of the ties.I can tell already that the shade afforded by the top will be a great feature when the summer sun starts blazing.I hope this helps others with their installations, it was a great winter project for me!"

    Jim Distefano

    Rating

  29. "Thank you fishmaster for your high quality product as well as the greatservice. Here is a photo of my recently restored Boston Whaler with thefishmaster T top, the leaning post, the anchor light, antenna base and light base. Thank you, Donny Albino from Puerto Rico."

    Donny Albino

    Rating

  30. "Awesome product and customer service - I love it!"

    Bobby Ream

    Rating

  31. "I had great customer service, my T top arrived in reasonable time. The T top was easy to assemble & the quality was excellent. The T top works great for my 18 foot Boston Whaler Outrage. I look forward in purchasing more product from you guys in the future. Thanks Dan."

    Daniel Engles

    Rating

  32. "I purchased a T top last month . It’s doing great. I Just love it. Thanks for the great product…"

    Ed Peltze

    Rating

  33. Theodoros Christidis' Athens

    Rating

  34. "I Absolutely love the top! This top was slightly modified to fit my Boston Whaler by the dealer (Atlantic Marine in Daytona) and has worked out great. Atlantic Marine did an excellent job and the experience was totally positive from the beginning to end."

    Tom Dean

    Rating

  35. Kenny Stetz

    Rating

  36. Adam Bowman

    Rating

  37. Tim & Spencer Haskin

    Rating

  38. "What a great look! My 1999 Boston Whaler Outrage 18 has never looked better than with your awesome T-Top on board. Thank you for a fantastic product! Captain Reno"

    Tom Renard

    Rating

  39. Brent Spencer

    Rating

  40. "I purchased this as a Christmas gift for my husband. He is absolutely thrilled with this T-top. Loves it a million times over.Thank you for making a great product with great shipping an easy assembly."

    Rob Giard

    Rating

  41. Steven Prato

    Rating

  42. "Here is a picture of my new Fishmaster Top on my Boston Whaler Dauntless 18ft. The top is better than I expected, my wife and I are very impressed!"

    Johnny Little

    Rating

  43. "I have a 17' Boston Whaler Montauk that has clearly on your website been an issue to install one of these tops. Well, I was a little concerned until I understood that it was due to the angles of the front that could not seat the feet. I ended up making a support out of wood to create a flat face on top out of treated plywood. Then wrapped it in fiberglass with a good amount of resin. You know the routine if you have worked with it before. I did not want to modify the boat so I made this part so if down the road it needs to be replaced I can take it out. The board was then mounted with 2" stainless screws and sealed with marine adhesive. From this I was able to mount the legs to the new flat front.. I then tried the test of yanking it and it seemed good. After all said and done I had to take it out. We hit some 2+ foot waves a few times and bounced the chop and all is good. I plan on putting 2 more of the support rods into the console before next trip just to have a little more piece of mind that my front feet are secure. I tried to shake them and they are not going anywhere, but when hitting the chop it seemed to top wobble a little. I will say that it is 100% worth the investment! Fishing around one of these is night and day then trying to with a bimini. I often would not put the old top up because of the hassle of fishing around it and come back sunburned and dehydrated. Well attached is a picture of the boat with the top..Thank you for the prompt shipping as well. Very nice!!!"

    James Mobley

    Rating

  44. "Everything went smooth with the install and the light bar was mounted using two of your universal accessory rails. Looks like we’ve got a sturdy well made top and my marine deputies have nothing but praise.Thank you, Sgt. Steve Russell Montcalm County Sheriff’s Office"

    Sgt. Steve Russell / Montcalm Sheriffs Dept.

    Rating

  45. "Spotted in Hope Town on Elboy Cay, Abaco, Bahamas"

    Elboy Cay

    Rating

  46. Fred Johnson

    Rating

  47. Jim Chapman

    Rating

  48. Irwin Hade

    Rating

  49. "Here are some pic's of my new top installed on my 1997 Boston Whaler Outrage. This top is awesome and gets compliments from everyone who sees it. It has turned my dive boat into a completely new boat. I was able to install it by myself in my driveway in about 3 hours.Your sales and customer service department is beyond compare and I can't wait to do business with you in the future."

    Keith Lumma

    Rating

  50. "Installed the top on my 18' Boston Whaler Dauntless with no problem. This top was installed while the boat was in the water at the dock. The next day it was 15 miles offshore."

    Chris Seda

    Rating

© 2024 Fishmaster. All Rights Reserved.