• Stainless Steel
• Mounts to Universal Folding Antenna Mounting Plate
• Comes with Stainless Steel Hardware
• Folds for Storage

• 'No Drilling Required' installation on both the Original & Pro Series Fishmaster T-Tops. Simply, remove the aft 2 stainless steel bolts in the middle of the top section, put the antenna bracket over the holes and replace the bolts - it's that easy!
• Universal for t-top top sections with 1.9" diameter tubing - including 2 different mounting configurations
• Large mounting surface to fit your favorite accessories (antennas, navigation lights, led lights, etc.)
• Flat mounting surface allows you to drill mounting holes custom to your accessory's hole configuration
• Constructed of 6061 T6 marine grade aluminum that is bright dipped anodized coated.
• We recommend you use anti-seize when assembling threaded nuts in the marine environment.
• GUARANTEED! - Love it or Return it.

• Swivels to be used on front, rear, or sides of the t-top. Works well with ratchet mount antennas brackets for GPS or FM/VHS existing antenna.
• Stamped from marine grade polished and anodized aluminum with stainless hardware that attaches antenna bracket to the plate.
• Holes are pre-drilled for exact mounting location. Its footprint is 3" by 1-1/2" on center and compatible with most folding antenna mount brackets.
• We recommend you use anti-seize when assembling threaded nuts in the marine environment.
• GUARANTEED! - Love it or Return it.

• Universal design mounts easily to any t-top frame or canopy between 1.9” and 2”. No drilling necessary!
• Simple DIY installation.
• Clam shell design comes apart in two pieces that can easily be placed in location that reassembled for use with your antennae.
• We recommend to use anti-seize when assembling threaded nuts in the marine environment.
• GUARANTEED! - Love it or Return it.
Antenna not included

• Mount any accessory made to clamp onto a 1" diameter railing.
• Clam shell design easily separates into two pieces that allows you to quickly install on the tower tube.
• Manufactured from CNC aluminum extrusion 6061-T6 then finished with a bright dipped anodized finish.
• This lightweight clamp is robust enough to ensure that equipment mounted to this rail is not going to leave you any time soon.
• Comes complete as a kit with 304 stainless steel hardware that is included.
• We recommend you use anti-seize when assembling threaded nuts in the marine environment
• GUARANTEED! - Love it or Return it.

The Universal Accessory Rail can be used to mount your electronics box to the Fishmaster T-Top. Even though we use this super strong universal rail is for the electronics box, it can be used to mount anything to your t-top that your heart desires. Sold as a pair.

• Same rail used for mounting the electronic box to the Fishmaster T-Top.
• Rail is 21 inches inside to inside.
• Allows the customer to mount virtually anything to the Fishmaster T-Top.
• Mounts above the console and comes with stainless mounting hardware.
• Use existing holes or drill additional holes to your requirements
• Super strong 1/4" aluminum stamped plate.
• GUARANTEED ! - Love it or Return it.
• Qty. 2

Mount your radar to our Radome Mounting Plate! Designed to mount easily to your Fishmaster t-top frame or any 1.9" or 2" tubing.

• 12" X 12" anodized aluminum plate for mounting your radar.
• Mounts easily to the Fishmaster t-top frame or any 1.9" or 2" tubing.
• Stainless hardware
• Super strong 1/4" aluminum stamped plate.

Permanently mount your outrigger holders to your Fishmaster t-top with these mounting brackets. The Fishmaster Outrigger Mounting Bracket easily attaches to the top section of your T-Top. Don't worry. We pre-drilled the holes for your so you can start attaching your outriggers ASAP.

• Mounts easily to the top section of your
• T-Top. Pre-Drilled holes in the bracket for attaching your outriggers.
• Works with all popular outriggers with 3" x 4" centers between holes and 3" main center hole
• Super strong polished and anodized aluminum.
• Stainless Hardware included to attached to your Fishmaster T-Top.

There are endless possibilities with Fishmaster's universal t-top accessories. This pair of Rod Grommets works with the console mounted rod holders to allow the rods to penetrate through the canvas.

• Facilitates using console mounted rod holders located underneath T-Top by allowing rods to penetrate through the canvas.
• Securely fastens to T-Top
• 18-8 Stainless Steel Hardware

Even if you don't have a Fishmaster T-Top you can still take advantage of our Fishmaster accessories! These universal mounts are designed to bridge the gap on smaller diameter pipes so you can use our Fishmaster Rod Holders , UHF Antenna Mount, Universal 1" Rail Mount, Folding Antenna Mounting Plate and Outrigger Holders.

• Allows Fishmaster accessories to be used with smaller diameter pipe including 1.66" and 1.32" Outside Diameter
• Can be used on the Fishmaster Rod Holders, UHF Antenna Mount, Universal 1" Rail Mount, Folding Antenna Mounting Plate and Outrigger Holders.
• Great for attaching rod holders to the casting platform or platform leaning rail.
• For rod holders and outrigger 0nly mount onto a vertical railing. Do not mount onto a horizontal railing.