We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Got a Question?
Both Fishmaster T-Tops are great choices for adding sun protection and functionality to your boat. Both models feature Fishmaster's patented twice holding design, fit center consoles 24-50" wide, and are quick and easy to install. The Original features Ø1.9" aluminum tubing while the Pro Series features a more robust Ø2.25" tubing. The Pro Series also features larger bases for added stability at the mounting points. Additionally, the design aesthetics of the two t-tops set them apart significantly. The Original features a simple, more angular design while the Pro Series is designed with sleek curvature that complements the sleek lines of today's boats.
The tubing is 1-1/2" schedule 40 pipe with a 1.900" outside diameter. The tube material is 6061-T6 marine grade aluminum that is polished and bright dip anodized which is the industry standard for T-Tops, wakeboard towers, radar arches, tuna towers, etc. All the hardware is 316 grade stainless steel, also a workhorse of the marine industry. The fabric is Sunbrella Marine grade Acrylic.
We recommend, when trailering any of our t-tops, to have them in the upright position and to not exceed recommended highway speeds.
Yes. All tubing is 6061-T6 aircraft grade aluminum that is polished and protected with a bright dip anodized finish. All hardware is marine grade stainless steel. It is recommended to wash after saltwater use and occasionally protect with a marine grade aluminum polish.
The inner flange is 1.25 inches. The outer flange on top is 1 7/8 inch, the bottom flange is 7/8 inch. Width of opening past inner flange is is 20 1/2 inches long by 6 7/8 inches high.
Fishmaster t-tops can safely be trailered at highway speeds. We recommend keeping the t-top in its upright position when trailering. Please be mindful that higher speeds and longer travel distances will cause more than the average wear on your t-top canvas.
We have an electronics box available as well as various brackets for the Fishmaster that can be used to mount antenna, radars, etc.
Normally about five minutes. There are two bolts that need to be removed from each of the four legs for the T-Top to fold forward. Then two bolts are removed from each side of the top section to allow it to fold. Only one bolt is required for each location except when used in rough water or when over 20 lbs of accessories are attached to the top. For customers that need to more regularly put their T-Tops up and down a quick release knob kit is available.
The overall dimensions of our 5 rod rocket launcher is just over 24" (616mm) wide.
We have had success with our t-tops fitting when folded, that being said the height of the t-top will be different for every boat as we do not have the information on what the t-top will make contact with first.
Please visit the link for replacements - https://fishmaster.com/replacement-feet-for-casting-platform-set-of-4.html
No, currently on our FIshmaster electronics box the log is proudly etched in the plexiglas.
Yes we do ship to Canada. Please utilize our dealer locator https://fishmaster.com/fishmaster-dealers to find a dealer near you or enter your address into checkout in cart to calculate shipping cost direct from us. Thank you!
Yes, we would actually recommend trailering the boat with the t-top upright. When it is folded, if not properly secured, it could cause damage to the t-top and/or boat.
The overall folded height will depend on the specific boat. We can't determine where the upper section would hit on every boat due to different items stopping the upper section of the t-top. It could be a seat that it hits first or the floor. Worse case if something did prevent it from making it into your garage the whole upper top section could be removed as well. All of that being said we don't have too many issues where it would not fit in a garage fully folded.
Yes, we do sell and ship to Canada.
The canvas top is made from sunbrella fabric so yes water is allowed thru.
For our Fishmaster t-tops we have seen some of our customer who are able to raise and lower the t-top by themselves while other may require two people to safely raise and lower it.
As long as your boat has a center console that is between 24" and 50" wide with a flat floor, our Pro Series or Original T-top would work for you.
